Identification Workstation
Custom-designed for high-volume identification work.
The Identification Workstation series of ductless fume hood enclosures are ideal for protecting the operator from toxic gases and particulates used in routine analysis. The unit protects the operator from residual cyanoacrylate and carbon-based powders used in forensic analysis. Other commonly used chemicals, such as methanol, xylene and acetone are also contained.
Identification Workstations are available in the two-speed controller model or with the AirSafe™ Controller. The AirSafe™ Controller automatically monitors filter life and airflow conditions. The AirSafe™ controller, not your nose, detects when to change the filters. The two-speed model offers excellent protection to the operator. The lower sash is outfitted with an electromagnetic controller that senses when the sash is lifted. When the sash is raised, the blower increases velocity to compensate for the additional opening.
Features:
- All surfaces in contact with corrosive fumes and liquids are structural polypropylene — NO MORE RUST!
- Horizontal baffles promotes airflow pattern throughout hood - NO DEAD SPOTS!
- High-capacity bonded carbon filter for common forensic chemicals
- HEPA filter removes powders at 99.997% efficiency at 0.3 microns
- Easily cleaned to prevent cross-contamination between cases and evidence
- AirSafe™ controller monitors and displays airflow face velocity on alphanumeric display
- Filter condition is monitored by AirSafe™ controller and user is warned when to change the bonded carbon and HEPA filters
- 30-Watt integral fluorescent light
- Face velocities exceed OSHA standards
- Adequate workspace to allow for superglue tank to be placed inside
- All units operate from a standard 110V or 220V electrical outlet
- Optional clear back panel and sides available
- Optional hanging bar and clips
AirClean’s forensic containment products meet and exceed OSHA and ANSI Z9.5 standards and guidelines.
| Physical Dimensions: | |||
| AC3000 | AC4000 | AC6000 | |
| EXTERNAL DIMENSIONS | |||
| Width | 36" | 48" | 72" |
| Depth | 30" | 30" | 30" |
| Height | 56" | 56" | 56" |
| INTERNAL DIMENSIONS | |||
| Width | 35" | 47" | 71" |
| Depth | 25" | 25" | 25" |
| Height | 35" | 35" | 35" |
- Cyanoacrylate Fuming Chamber
- Evidence Drying Cabinet
- Swab Dryer
- PCR Workstation
- Identification Workstation
- Forensic Workstation
- MailSafe™
Upcoming Tradeshows:
IAFS
July 21-26
New Orleans, LA
IAI
August 17-23
Louisville, KY
ASCLD
September 16-18
Salt Lake City, UT
FDIAI
October 26-30
Panama City, FL
